CPCD20

CPCD20

聯系我們

留言

General概要	1	Model型號				CPC 20/CPCD 20
	2	Rated Load Capacity額定載重			kg	2000
	3	Load Center載荷中心距			mm	500
Dimensions尺寸	4	Lifting Height起升高度			mm	3000
	5	Free lifting Height自由起升高度			mm	115
	6	Fork Size貨叉尺寸		LxWxH長寬高	mm	1070×122×40
	7	Mast Tilting Angle門架傾角		F/R前后		6/12
	8	Length (without fork)長度（不帶貨叉）			mm	2500
	9	Overall Width寬度			mm	1164
	10	Mast Height After Mast Fall門架落地高度			mm	2000
	11	Lift Height門架起升高度			mm	4000
	12	Overhead Guard Height護頂架高度			mm	2150
	13	Turning Radius轉彎半徑			mm	2190
	14	Front /back Overhang前懸距/后懸			mm	455
	15	Min. Right Angle Stacking Width最小直角通道寬度			mm	2230
	16	Wheelbase軸距			mm	1600
	17	Track輪距		Front前	mm	970
	18			Rear后	mm	970
	19	Ground Clearance最小離地間隙	Mast門架處		mm	115
	20		Car Center軸中心		mm	170
Tire輪胎	21	Front Tire前輪				7.00-12-12PR
	22	Rear Tire后輪				6.00-9-10PR
Performance性能	23	Speed速度	Travel運行	Full Load滿載	km/h	17
	24			No load空載	km/h	19
	25		Lifting起升	Full Load滿載	mm/s	530
	26			No load空載	mm/s	550
	27		Lowering下降	Full Load滿載	mm/s	550
	28			No load空載	mm/s	450
	29	Max.Drawbar Pull最大牽引力		Full/No Load滿載/空載	kg	1250/850
	30	Max.Gradeability最大爬坡度		Full/No Load滿載/空載	%	20/20
Weight重量	31	Total Weight整機重量			kg	3320
Power&Transmission動力與傳動	32	Battery蓄電池	Voltage/Capacity電壓/容量		V/AH	12/80
	33	Engine發動機	Model型號			XINCHAI C490BPG
	34		Rated Power/Speed額定功率/轉速		Kw/rpm	40/2650
	35		Max.Torque/Speed最大扭矩/轉速		N.m/rpm	157/1800
	36	Work Pressure工作壓力			Mpa	17.5
	37	Fuel Tank Capacity油箱容積			L	60
	38	Transmission Type制動類型				Mechanical/Automatic機械擋/機械液力/電子液力